PATCH AND PLUG is a quick setting hydraulic cement.
When mixed with water into a putty consistency, it sets in 2–3 minutes. Non-shrinking, PATCH AND PLUG is the perfect hydraulic cement. Whether water is pouring in under pressure, or seeping in as a slow leak, the flow stops immediately when PATCH AND PLUG is pressed into the hole or crack.
For both industrial and domestic use, it is an ideal emergency product to have at all times.
1kg and 5kg
12 months if stored under the right conditions in unopened containers.
Always attempt to prepare the recess by undercutting or square cutting. Open cracks or holes have to be cut to a minimum depth and width of 2cm. All cuttings and dirt must be flushed away.
3.5 parts powder: 1 part water by weight or 3 parts powder: 1 part water by volume.
Mix PATCH AND PLUG with clean water only. Add powder to water, obtaining a fluid workable mortar. Mix well, PATCH AND PLUG will start to stiffen and form into an easily mouldable putty after approximately 60 seconds.
When slight warmth can be felt from the center of the putt, force PATCH AND PLUG into the hole or crack by pushing firmly, using maximum pressure.